Trailer & RV Repair, Maintenance and Custom Fabrication in Laval and Greater Montreal

A trailer that pulls to one side, sways at highway speed, or shows uneven tire wear is telling you something is wrong. Our shop diagnoses and repairs the full range of trailer and RV problems so you get back on the road quickly and safely. Common repairs we handle every week include:

• Brakes — electric and hydraulic brake diagnosis, drum and disc service, brake controller issues, magnets, actuators and complete brake system replacement.
• Axles — bent or overloaded axle replacement, alignment correction, spindle repair and axle upgrades for higher load ratings.
• Wheel bearings — inspection, repacking and replacement of worn or seized bearings, races and seals before they cause a roadside failure.
• Couplers and hitches — worn or damaged coupler replacement, ball mounts, safety chains, breakaway systems and jack repair.
• Lighting and wiring — corroded harnesses, dead running lights, brake and turn signal faults, connector and ground repairs.
• Suspension — leaf springs, shackles, equalizers, bushings and worn hangers.

For RV owners, we service running gear, brakes, bearings and structural components so your recreational vehicle is safe for the towing season. Every repair is done by experienced technicians who understand the loads and stresses trailers endure.

The cheapest repair is the one you never need. Regular trailer maintenance catches wear before it strands you on the highway or damages your load. We recommend a maintenance inspection at least once a season, and before any long haul or heavy job. A typical service includes:

• Wheel bearing inspection and repacking
• Brake adjustment and wear check
• Tire condition, pressure and torque verification
• Coupler, safety chain and breakaway inspection
• Full lighting and wiring test
• Suspension and frame inspection for cracks or fatigue

Fleet operators, contractors and rental companies rely on our maintenance programs to keep multiple units road-ready and to minimize costly downtime. Preventive care also protects the resale value of your trailer or RV and helps you pass inspection the first time.

Trailers work hard, and over time the frame absorbs punishment from heavy loads, rough roads, potholes and corrosion. When a chassis starts to flex, crack or sag, it is not just a comfort issue — it is a safety risk. We specialize in chassis reinforcement and frame solidification to restore and increase the strength of your trailer:

• Reinforcing weak, cracked or fatigued frame sections
• Gusseting stress points and high-load junctions
• Adding cross members, tongue reinforcement and support brackets
• Repairing and reinforcing corroded frame areas
• Upgrading a frame to carry heavier loads safely

This is where our welding expertise and structural know-how make the difference. Rather than simply patching a symptom, we strengthen the trailer so it stands up to real-world use for years to come. If your trailer feels flimsy, has visible cracks, or was built lighter than the job demands, a reinforcement is often far more economical than replacement.

Off-the-shelf trailers rarely match every job perfectly. Our shop builds custom trailer modifications so your equipment works the way you need it to. Whether you are adapting a trailer for a new trade, a specific machine, or a personal project, we design and fabricate practical, durable solutions, including:

• Ramps, gates, tailgates and loading systems
• Racks, toolboxes, tie-down points and cargo securing
• Sidewalls, headache racks and load containment
• Deck extensions, custom platforms and equipment mounts
• Winch mounts, spare tire carriers and accessory installation
• Hitch and coupler conversions

Every modification is engineered for strength and safety, then finished with quality welding. Tell us how you use your trailer and what is not working, and we will propose a modification that solves the problem.

Solid welding is the backbone of every repair, reinforcement and custom build we deliver. Our certified welders work on the steel and aluminum structures that trailers and RVs depend on, from small crack repairs to full structural fabrication. We handle frame welding, tongue and coupler welding, cracked weld repair, corrosion cutout and replacement, and custom fabrication. Because we combine welding skill with a deep understanding of trailer loads and geometry, our welds are placed where they matter and built to last. If you have a broken weld, a cracked frame, or a fabrication project, our welding shop in Laval is ready to help.

A trailer or RV that fails inspection cannot legally hit the road, and an unsafe unit puts you and everyone around you at risk. We help you get ready for SAAQ inspection by identifying and correcting the items inspectors look for: brakes, lighting, tires, coupler and safety-chain condition, frame integrity and suspension. We inspect your unit, explain exactly what needs attention, complete the necessary repairs and reinforcements, and get your trailer to a compliant, safe standard. Coming to us before your inspection saves time, avoids a failed appointment, and gives you confidence that your equipment is genuinely road-worthy — not just paperwork-ready.

Prefer to do the work yourself, or need a part fast? We supply trailer and RV parts and ship across Quebec, with free shipping on orders over $300. From brake components, bearings, couplers and lighting to suspension parts and hardware, we can source what your unit needs. If you are not sure which part fits, call us at 450-232-7828 and one of our technicians will help you identify the right component the first time — no guesswork, no wasted orders.

Trailer owners across Laval, Montreal and the North Shore choose us because we combine genuine expertise with honest, reassuring service. Here is what sets our shop apart:

• 4.9/5 rating from 114 reviews — a track record built on doing the job right.
• Specialized trailer and RV focus — this is what we do every day, not a sideline.
• In-house welding and fabrication — repairs, reinforcement and custom work under one roof.
• Clear communication — we explain what is wrong, what it costs, and what can wait.
• Convenient location — 1870 rue Cunard, Laval, easily reached from across Greater Montreal.

From a quick brake fix to a full chassis reinforcement or a custom-built trailer modification, our team treats your equipment as if it were our own. Book your repair, maintenance or inspection today by calling 450-232-7828, or ask us about shipping the parts you need anywhere in Quebec.